دانلود کتاب Metallocene Technology in Commercial Applications

Second in the Metallocene series from PDL, this book focuses on the commercial use and process improvements of resins produced with metallocene, single site, and other modern catalytic methods. Research to broaden the scope of applications and shorten production cycles is presented. New and improved polymer blends resulting from the use of new catalysts and improved polymer compatability are explored as well as new applications becoming possible due to improved and balanced properties.Current trends and the latest research from the international scientific and industrial community are presented in this volume. Chapters cover use in extrusion, film manufacture, injection molding, foam production, fiber spinning, composites and new applications. Precise testing methods, material characterization, polymer morphology and crstallization are the focus of another section of the book. Content:• Front Matter • Preface • Table of Contents •Part I. Catalytic Systems 1. Single-Site Supported Catalysts for Ethylene 2. Synthesis of High-Molecular-Weight Elastomeric Polypropylene with Half-Titanocene/MAO Catalysts • Part II. Precessing Methods: Blending 3. Is Metallocene Polyethylene Blend with HDPE More Compatible Than with PP? 4. Spherulite Boundary Strengthening: A New Concept in Polymer Blends 5. Modification of Syndiotactic Polystyrene 6. Blends of Ethylene/Styrene Interpolymers and other Polymers: Benefits in Applications • Part III. Precessing Methods: Extrusion 7. Easy Processing Metallocene Polyethylene 8. Effect of Metallocene Polyethylene on Heat Sealing Properties of Low Density Polyethylene Blends 9. Extrusion Operation Window for Filled Metallocene Polyethylenes 10. Processing Trends of Metallocene Linear Low Density Polyethylenes and Their Influence on Single Screw Design 11. Influence of mPE Grades on the Dynamic Properties of PP/mPE-Blends 12. "Single-Site" Catalyzed Polyolefin for Fresh-Cut Produce Packaging. A Comparison between Monoextruded Blends and Coextruded Film 13. Rheology and Processing Experience of New Metallocene Polyolefins • Part IV. Precessing Methods: Film Forming 14. Properties and Film Applications of Metallocene-Based Isotactic Polypropylenes 15. Phase Structure Characterization and Processing-Structure-Property Relationships in Linear Low-Density Polyethylene Blown Films 16. The Relative Influences of Process and Resin Time-Scales on the MD Tear Strength of Polyethylene Blown Films 17. Metallocene Catalyzed Polyethylene in Blown Film Applications. A Comparison between Monoextruded Blended Films and Coextruded Films 18. Trade-offs in Blown Film Processing-Structure-Property Behavior of LLDPE Type Resins from Chromium, Metallocene and Ziegler-Natta Catalysts • Part V. Precessing Methods: Injection Molding 19. Transparent Metallocene-Polypropylene for Injection Molding 20. Equipment Design Considerations for Processing with Metallocene Resins • Part VI. Precessing Methods: Other Processing Methods 21. Product and Process Developments in the Nitrogen Autoclave Process for Polyolefin Foam Manufacture 22. Properties of Syndiotactic Polypropylene Fibers Produced from Melt Spinning 23. Melt Spinning of Syndiotactic Polypropylene: Structure Development and Implications for Oriented Crystallization • Part VII. Properties 24. New Polyolefins Characterization by Instrumental Analysis 25. Dynamic Melt Rheometry Used to Study Degradation of Metallocene Polyethylene 26. Melt Rheology and Processability of Conventional and Metallocene Polyethylenes 27. Rheology of Metallocene-Catalyzed Polyethylenes. The Effects of Branching 28. Extensional and Shear Rheology of Metallocene-Catalyzed Polyethylenes 29. A Criterion for the Onset of Gross Polyolefins: Molecular Structure Effect 30. Relationship between Structure and Rheology of Constrained Geometry Catalyzed and Metallocene Polyethylenes 31. The Influence of Sequence Length Distribution on the Linear Crystal Growth of Ethylene-Octene Copolymers 32. Crystallization and Microstructure of Ziegler-Natta and Metallocene Based Isotactic Polypropylenes: Simulation and Experiment 33. Crystallization of Ethylene-Octene Copolymers at High Cooling Rates 34. Kinetics of Non-Isothermal Crystallization Syndiotactic Polypropylene: Avrami, Ozawa, and Kissinger Approaches 35. High Temperature Flexible Polyolefins a User's Perspective • Part VIII. Markets 36. An Outlook for Metallocene and Single Site Catalyst Technology into the 21st Century 37. World Olefins Markets: Issues Influencing Availability and Pricing 38. World Polypropylene Demand 39. PVC Markets, Today and in 2020 Index