دانلود کتاب Advances in Ceramic Coatings and Ceramic-Metal Systems: Ceramic Engineering and Science Proceedings, Volume 26, Number 3

This volume includes 46 contributed articles from the Advanced Ceramic Coatings for Structural, Environmental and Functional Applications and the International Symposium on Advances in Ceramic-Metal Systems symposia. Topics include processing and microstructure design, mechanical and thermal properties, advanced testing and non-destructive evaluation, wear, erosion and corrosion behavior, functional properties and modeling. A significant portion of the contributed articles focus on current state-of-the-art industrial applications of ceramic coatings and ceramic-metal composites.Content: Chapter 1 New Thermal Barrier Coatings Based on Pyrochlore/YSZ Double Layer Systems (pages 2–10): Robert Va?en and Detlev StoverChapter 2 Mechanical and Thermal Properties of Advanced Oxide Materials for Higher?Temperature Coatings Applications (pages 11–19): Sung R. Choi, Narottam P. Bansal and Dongming ZhuChapter 3 Sintering, Phase Stability, and Thermal Conductivity of Plasma?Sprayed Gd2O3?Stabilized ZrO2 (pages 21–28): Mohamed N. Rahaman, Jacob R. Gross, Rollie E. Dutton and Hsin WangChapter 4 Curvature Studies of Unconstrained Thermal Barrier Composites (pages 29–36): O. Zubacheva, J. Malzbender, R. W. Steinbrech, L. Singheiser and U. SchulzChapter 5 Manufacture and Properties of Segmented Thermal Barrier Coatings (pages 37–45): Robert Va?en, Hongbo Guo and Detlev StoverChapter 6 Effect of Scattering on the Heat Transfer Behavior of a Typical Semitransparent TBC Material on a Substrate (pages 47–54): Charles M. SpucklerChapter 7 Determination of the Fracture Toughness of Thermally Grown Oxide (TGO) in a Thermal Barrier System (pages 55–62): Jurgen Malzbender, Isabel Escobar, Roland Herzog, Rolf W. Steinbrech and Heinrich OttelChapter 8 On the Thermal Cycling and Evolution of Surface Morphology for Thermally Cycled NiCoCrAlY Bondcoats (pages 64–72): Jun Shi, Anette M. Karlsson, Bernd Baufeld and Marion BartschChapter 9 Stress Distribution in APS?TBCs Under Thermal Cycling Loading Conditions (pages 73–80): P. Bednarz, R. Herzog, E. Trunova, R. W. Steinbrech, H. Echsler, W. J. Quadakkers, F. Schubert and L. SingheiserChapter 10 Damage Process of Thermal Barrier Coating Subjected to Thermal Cycling Under High Heat Flux (pages 81–88): Mitsutoshi Okada, Tohru Hisamatsu, Ryuichi Ohtani, Hideyuki Arikawa and Yoshitaka KojimaChapter 11 Investigation of Thermal Fatigue Life Prediction of Thermal Barrier Coating (pages 89–93): Y. Ohtake, T. Natsumura and K. MiyazawaChapter 12 Microstructure and Phase Constituents of the Thermally Grown Oxide in Thermal Barrier Coatings (pages 95–102): S. Laxman, H. Heinrich and Y. H. SohnChapter 13 The Role of Cyclic Mechanical Loading and Thermal Gradients in Damage Behavior of Thermal Barrier Coating Systems (pages 103–110): Marion Bartsch, Bemd Baufeld, Serdar Dalkrilic and Michael HeinzelmannChapter 14 Thermal Wave Imaging Application in Thermal Barrier Coatings (pages 112–119): B. Franke, Y. H. Sohn, X. Chen, J. R. Price and Z. MutasimChapter 15 Nondestructive Evaluation of Thermal Barrier Coatings by Mid?Infrared Reflectance Imaging (pages 121–128): Jeffrey I. Eldridge, Charles M. Spuckler, James A. Nesbitt and Richard E. MartinChapter 16 Damage Detection of Thermal Barrier Coatings by Electrochemical Impedance Spectroscopy (pages 129–136): B. Jayaraj, S. Vishweswaraiah, V. H. Desai and Y. H. SohnChapter 17 Thermal Behaviour of Thermal Barrier Coatings and Steel/Thermal Barrier Coatings Structures (pages 137–144): Eugenio Garcia, Reza Soltani, Thomas W. Coyle, Javad Mostaghimi, Angel De Pablos, Maria Isabel Osendi and Pilar MiranzoChapter 18 Development and Evaluation of Ceramic Components and EBCS For Gas Turbine (pages 146–157): Takero Fukudome, Sazo Tsuruzono, Tetsuo Tatsumi, Yoshihiro Ichikawa, Tohru Hisamatsu and Isao YuriChapter 19 Crack Driving Forces in a Multilayered Coating System for Ceramic Matrix Composite Substrates (pages 159–166): Louis J. Ghosn, Dong Ming Zhu and Robert A. MillerChapter 20 Producing Surface Coatings on Silicon Nitride by Pack Cementation (pages 167–172): S. D. Nunn, R. A. Lowden and F. C. MontgomeryChapter 21 Metal?Organic Chemical Vapor Deposition of Environmental Barrier Coatings for All?Oxide Ceramic Matrix Composites (pages 173–179): I. Troster, S. V. Samoilenkov, G. Wahl, W. Braue, P. Mechnich and H. SchneiderChapter 22 The Oxidation of Aluminum Silicon Carbide (pages 181–188): Roger Wills and Steve GoodrichChapter 23 Solid?Particle Erosion of Thin Films Deposited on Ceramics (pages 190–198): S. Singh, D. Singh, J. P. Singh, R. N. Singh and J. L. RoutbortChapter 24 Ceramic and Cermet Coatings for Cylinder Liners in Ultra?Light Weight Engines (pages 199–209): Antonio Candel, Rainer Gadow and Daniel LopezChapter 25 Al2O3 and SiO2 Coatings for Improving the Wear Resistance of Glass Panes (pages 211–218): G. Fehringer and R. ClasenChapter 26 Characterization of Spin?Coated Terbium?Doped Strontium Cerate Thin Film Membranes (pages 219–227): Mohamed M. Elbaccouch, Satyajit Shukla, Nahid Mohajeri, Sudipta Seal and Ali T?RaissiChapter 27 Cermet and Hard Metal Coatings for Advanced Large Diesel Engines with Reduced Pollutant Emissions (pages 229–237): Antonio Candel, Rainer Gadow and Daniel LopezChapter 28 Stabilization of Ethanol Based Ceramic Suspensions for Electrophoretic Deposition (pages 239–246): Mohan Menon, Sophie Decouroelle, Nizar Attia, Severine Ramousse and Peter Halvor LarsenChapter 29 The Role of Wetting and Reactivity in Infiltration of Ceramic?Metal Composites (pages 248–261): Rajiv Asthana, Mrityunjay Singh and Natalia SobczakChapter 30 Enhanced Wettability by Copper Electroless Coating of Carbon Nanotubes (pages 263–270): Camille Probst, Celine Goujon, Raynald Gauvin and Robin A. L. DrewChapter 31 Fabrication of Strengthened and Toughened Intra?Type Ceramic Matrix Nanocomposites using a Soaking Method (pages 271–279): Seong?Min Choi, Takuya Matsunaga, Sawao Honda, Shinobu Hashimoto, Yoshitomo Kobayashi and Hideo AwajiChapter 32 Fabrication and Damping Behavior of Barium Titanate Reinforced Copper Matrix Composites (pages 281–288): T. A. Asare, J. P. Schultz, B. D. Poquette, A. O. Aning and S. L. KampeChapter 33 Shape?Preserving Chemical Conversion of Self?Assembled 3?D Bioclastic Micro/Nanostructures Via Low?Temperature Displacement Reactions (pages 289–296): Shawn M. Allan, Michael R. Weatherspoon, Phillip D. Graham, Ye Cai, Michael S. Haluska, Robert L. Snyder and Kenneth H. SandhageChapter 34 Thermally Sprayed Prepregs for Advanced Metal Matrix Composites (pages 298–307): R. Gadow and K. V. NiessenChapter 35 THKO?Formed Light Metal Composites with Light?Weight Ceramic Fibers (pages 309–317): R. Gadow, K. V. Niessen and P. UnseldChapter 36 Development of Glass/Nano?Ceramic Composites for Sealing Solid Oxide Fuel Cells (pages 320–330): M. Brochu, B. D. Gauntt, D. Zschiesche, R. Shah and R. E. LoehmanChapter 37 Co?Sintering Behaviour of Porous Ni?YSZ Composite SOFC Anodes (pages 331–340): R. M. C. Clemmer and S. F. CorbinChapter 38 Reactive Air Brazing of LSCoF and Alumina with Ag?V2O5 Alloys for SOFC Applications (pages 341–348): N. M. Zink, A. M. Meier, K. S. Weil and J. S. HardyChapter 39 Photonic Fractals of Dielectric and Metal Media for Electromagnetic Wave Localization (pages 349–360): Y. Miyamoto, S. Kirihara, M. W. Takeda, K. Honda and K. SakodaChapter 40 Integration of Ceramic/Epoxy Photonic Fractals with Localization of Electromagnetic Waves (pages 361–366): A. Mori, S. Kirihara, Y. Miyamoto, M. W. Takeda, K. Honda and K. SakodaChapter 41 Strong Localization of Electromagnetic Wave in Ceramic/Epoxy Photonic Fractals with Menger?Sponge Structure (pages 367–372): Soshu Kirihara, Yoshinari Miyamoto, Mitsuo Wada Takeda, Katsuya Honda and Kazuaki SakodaChapter 42 Aluminum Air Brazing for Joining Ceramics (pages 374–382): Jin Yong Kim, John S. Hardy and K. Scott WeilChapter 43 Brazing of Stainless Steel to YSZ Using Silver?Base Brazes (pages 383–390): Mrityunjay Singh, Tarah P. Shpargel and Rajiv AsthanaChapter 44 Brazing of Porous Alumina to Monolithic Alumina with Ag?CuO and Ag?V2O5 Alloys (pages 391–398): M. C. Lamb, S. J. Camardello, A. M. Meier, K. S. Weil and J. S. HardyChapter 45 Strategies for Bonding W and Al2O3 at Low Temperatures (pages 399–406): Yuttanant Boonyongmaneerat, Christopher A. Schuh and Thomas W. EagarChapter 46 Use of Geopolymeric Cements as a Refractory Adhesive for Metal and Ceramic Joins (pages 407–413): Jonathan Bell, Matthew Gordon and Waltraud Kriven