جزییات کتاب
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.Content: Chapter 1 Stability of Polycrystalline Nextel 720 Fiber (pages 24–34): Gopal DasChapter 2 Mechanical and Structural Analysis of Silicon Carbide Fiber Hi?Nicalon Type S (pages 35–42): M. Takeda, J. Sakamoto, A. Saeki and H. IchikawaChapter 3 Fiber Strength with Coatings from Sols and Solutions (pages 43–52): Randall S. HayChapter 4 Porous Aluminum Oxide and Lanthanum Phosphate Fiber Coatings (pages 53–60): E. Boakye and M. D. PetryChapter 5 Thermomechanical Behavior of Advanced SiC Fiber Multifilament Tows (pages 61–67): Hee Mann Yun and James A. DicarloChapter 6 Characterization of Fiber Materials Using Metallographic and Image Analysis Techniques (pages 68–75): Matthias Hoffmann and David J. DiazChapter 7 Impregnation Molding of Particle Filled Preceramic Polymers into Fiber Preforms (pages 78–89): Merve Erdal and Selcuk GttceriChapter 8 Method for Reinforcing Threads in Multilayer Composite Tubes and Cylindrical Structures (pages 90–97): G. R. Romanoski and T. D. BurchellChapter 9 Influence of Fiber Lay?Up Sequence on Mechanical Properties of SiC(f)/SiC Composites (pages 98–109): Dileep Singh, Jitendra P. Singh and Manish SutariaChapter 10 Processing, Properties, and Microstructure of Hvrnicalon Fiber Cloth?Reinforced Zirconium Phosphate Composites (pages 110–117): Barry A. Bender, Roy J. Rayne, Todd L. Jessen and Scott BrowningChapter 11 Fabrication and Properties of Dense Silicon Carbide Matrix Composites (pages 118–124): S. Suyama, T. Kameda, N. Amiji, M. Umezawa and H. IchikawaChapter 12 Microstructure and Interface Characteristics of Alumina?Zirconia Composites (pages 125–130): R. F. Yttergren, Z.?K. Liu and D. J. RowcliffeChapter 13 Fabrication and Mechanical Properties of Si3N4 Based Composites with Layer Structure (pages 131–138): Yasuhiro Shigegaki, Manuel E. Brito, Kiyoshi Hirao and Motohiro ToriyamaChapter 14 The Multi?Fracture Response of Cross?Ply Ceramic Composites (pages 139–146): D. L. Erdman and Y. J. WeitsmanChapter 15 Modeling of Flexural Behavior of Continuous Fiber Ceramic Composites (pages 147–156): S. Raghuraman, E. Lara?Curzio and M. K. FerberChapter 16 Low?Cycle Tensile Fatigue Behavior of a SiC/SiC Composite (pages 157–165): O. UnalChapter 17 Laminated Matrix Composites—A New Class of Materials (pages 166–173): W. Jack Lackey, Sundar Vaidyaraman and Karren L. MoreChapter 18 Low Cost, Near?Net Shape Ceramic Composites Using Resin Transfer Molding and Pyrolysis (RTMP) (pages 174–183): W. J. Sherwood, C. K. Whitmarsh, J. M. Jacobs and L. V. InterranteChapter 19 Improvement of Si?Ti(Zir)?C?O Fiber and a Precursor Polymer for High Temperature CMC (pages 184–191): T. Yamamura, S. Masakl, T. Ishlkawa, M. Sato, M. Shibuya and K. KumagawaChapter 20 B4C Coated Carbon Fibre Reinforced Si,N4 (pages 194–202): P. M. Bronsveld, I. Gideonse, A. van der Heide, S. Guder, J. Th. M. De Hosson, E. Sabouret, J. B. Veyret and E. BullockChapter 21 Damage Evolution Due to Thermal Shock in a 2?D Woven Fiber?Reinforced CVI SiC Composite (pages 203–210): James E. Webb and Raj N. SinghChapter 22 Carbon?Carbon Composites Joining (pages 211–224): Liang A. XueChapter 23 Residual Stress and Poisson Expansion Effects on the Fibre?Matrix Interfacial Properties Measured in Fibre Push Tests. (pages 225–232): A. M. Daniel, M. R. Elizalde, J. M. Martinez?Esnaola and J. JanczakChapter 24 Microstructure and Mechanical Response of Lanthanum Phosphate/Yttrium Aluminate and Yttrium Phosphate/Yttrium Aluminate Systems (pages 233–240): Dong?Hau Kuo and Waltraud M. KrivenChapter 25 Sol?Gel Coating of Nicalon™ Fiber Cloths (pages 241–249): Michael K. CinibulkChapter 26 Rb ??Alumina as an Interface Coating in Oxide CMCs (pages 250–257): S. Sambasivan, J. A. Morris and W. T. PetuskeyChapter 27 Interfacial Bonding of Carbon?Coated Glass Fiber Reinforced Cement (pages 258–265): Chao M. Huang, D. Zhu, C. X. Dong, W. M. Kriven, R. Loh Kriven and J. HuangChapter 28 Investigation of Fiber/Matrix Interfacial Mechanical Behavior in Ceramic Matrix Composites by Cyclic Fiber Push?In Testing (pages 266–279): J. I. Eldridge, R. T. Bhatt, N. P. Bansal and F. A. OlmsteadChapter 29 Interface Modification During Oxidation of a Glass?Ceramic Matrix / SiC Fibre Composite. (pages 280–287): A. M. Daniel, A. Martin?Meizoso, K. P. Plucknett and D. N. BraskiChapter 30 Hi?Nicalon™ SiC Fiber Reinforced Glass and Glass?Ceramic Matrix Composites (pages 290–298): William K. TredwayChapter 31 Mullite Fiber Reinforced Reaction Bonded Si3N4 Composites (pages 299–306): T. Saleh, A. Lightfoot, J. Haggerty and A. SayirChapter 32 The Effect of Fiber Loading on the Mechanical Behavior of Unidirectional CFCMCs (pages 307–315): Todd L. Jessen, Barry A. Bender and Victor A. GreenhutChapter 33 Tensile and Interlaminar Shear Evaluation of Du Pont Lanxide CMCS (pages 316–323): Michael R. Effinger, Dennis S. Tucker and Terry R. BarnettChapter 34 Microstructures and Mechanical Properties of Hi?Nicalon Fiber Reinforced Si3N4 Matrix Composites (pages 324–332): K. Nakano, S. Kume, K. Sasaki and H. SakaChapter 35 Mechanical Properties and Microstructure of Oxidized SiC/SiC Composites (pages 333–341): O. Unal, A. J. Eckel and F. C. LaabsChapter 36 Mechanisms of Hot Corrosion of a Silicon Carbide Fiber?Reinforced Glass?Ceramic (pages 342–348): Atul Kumar, Alan G. Fox and Shaio?Wen WangChapter 37 Fracture Energy and Fiber Pullout Process of a Continuous Carbon Fiber Reinforced Silicon Nitride Matrix Composite at Elevated Temperatures (pages 349–356): T. Miyajima, D. Torikai and Y. YamauchiChapter 38 Elevated Temperature Properties and Performance of Nicalon™ Reinforced Enhanced SiC Matrix Composites (pages 357–365): Mehran Elahi, Kenneth Reifsnider and Thomas DunyakChapter 39 Time Dependence of Oxidation?Induced Microstructural Changes in Nicalon? and Nextel?Reinforced SiC (pages 366–374): P. F. Tortorelli and K. L. MoreChapter 40 Process Simulation for RTM of Blackglas™ Matrix/Nextel™ Fiber Ceramic Composites (pages 376–385): R. Leek, G. Carpenter, J. Madsen and T. M. DonnellanChapter 41 Curing and Pyrolysis of Blackglas™ Resins and Composites (pages 386–393): Roger Y. Leung and Wallace D. PorterChapter 42 NMR Study of Redistribution Reactions in Blackglas™ and their Influence on Oxidative Stability (pages 394–400): M. A. B. Meador, F. I. Hurwitz and S. T. GonczyChapter 43 Pyrolysis Behavior of Blackglas™ Composites (pages 401–410): J. Annamalai, W. N. Gill, A. Tobin, J. Madsen and T. M DonnellanChapter 44 Performance of Blackglas™ Composites in 4000?Hour Oxidation Study (pages 411–420): S. Campbell, S. Gonczy, M. McNallan and A. CoxChapter 45 Strength of Fabric Reinforced Blackglas Composites (pages 421–430): Charles Lei and Frank K. KoChapter 46 Abradability Testing of Bn?Nextel™ 312/Blackglas™ 3?D Woven Composites and the Effect on Retained Strength (pages 431–440): Durell Wildman and Pramod KhandelwalChapter 47 NDE of Nextel™ 312 and Nicalon™ Fiber Reinforced Blackglas™ Composites (pages 441–448): Pramod Khandelwal, George Y. Baaklini, Don J. Roth, James R. Bodis and Richard W. RauserChapter 48 Processing and Performance of SiC/Blackglas™ CFCCs using Filament Winding (pages 449–458): M. N. Ghasemi Nejhad, M. V. Chandramouli and A. A. Wereszczak