جزییات کتاب
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.Content: Chapter 1 High Technology Ceramic Coatings—Current Limitations/Future Needs (pages 1089–1093): T. E. Schmid and R. J. HechtChapter 2 Vapor Deposition of Crystalline Diamond (pages 1095–1102): K. E. Spear, M. Frenklach, A. Badzian, T. Badzian and R. MessierChapter 3 Sol?Gel?Derived Thin Films (pages 1103–1109): C. J. BrinkerChapter 4 Electrophoretic Alumina Sol?Gel Coatings on Metallic Substrates (pages 1111–1118): D. E. Clark, W. J. Dalzell and D. C. FolzChapter 5 Surface Modification of Alumina by Incorporation of Mullite as a Second Phase (pages 1119–1120): B. R. Marple and D. J. GreenChapter 6 A Perspective on Fiber Coating Technology (pages 1121–1124): David C. CranmerChapter 7 Advanced Porous Coating for Low Density Ceramic Insulation Materials (pages 1125–1135): Daniel B. Leiser, Rex Churchward, Victor Katvala, David Stewart and Aliza BalterChapter 8 Ceramic Coatings Via PVD (pages 1137–1157): P. A. Dearnley and T. BellChapter 9 Codeposition of Compounds by Chemical Vapor Deposition in a Fluidized Bed of Particles (pages 1159–1168): J. L. KaaeChapter 10 Thermal Wave Evaluation of CVD SiC Coatings (pages 1171–1180): D. N. Rose, S. M. Shepard, D. C. Bryk, M. Chaika, W. Jackson, C. P. Gazzara, C. O. Ruud and D. J. SnohaChapter 11 Characterization of Ceramic Coatings by Advanced Nondestructive Evaluation Methods (pages 1181–1188): J. W. MacLachlan, L. C. Aamodt and J. C. MurphyChapter 12 Residual Stress Calculations in Coating Configurations Using Finite Element Analysis (pages 1189–1197): T.?L. Sham and V. K. SarinChapter 13 Thermal Stability of Ceramic Coated Thermal Protection Materials in a Simulated High?Speed Earth Entry (pages 1199–1206): David A. Stewart and Daniel B. LeiserChapter 14 Ceramic Coatings for Cutting Tool Applications (pages 1209–1214): Pallavoor N. VaidyanathanChapter 15 Low?Temperature CVD Tungsten Carbide Coatings for Wear/Erosion Resistance (pages 1215–1222): D. Garg, P. N. Dyer, D. B. Dimos, S. Sunder, H. E. Hintermann and M. MaillatChapter 16 Chemical Vapor Deposition of Oxidation Resistant HfB2 + SiC Composite Coatings (pages 1223–1231): W. J. Lackey, Arlynn W. Smith and Douglas J. TwaitChapter 17 Fabrication of Fiber?Reinforced Hot?Gas Filters by CVD Techniques (pages 1233–1243): D. P. Stinton, R. A. Lowden and R. ChangChapter 18 Ceramic Coatings for Corrosion Environments (pages 1245–1260): Mark Van Roode, Jeffrey R. Price, Richard E. Gildersleeve and Charles E. SmeltzerChapter 19 Microporous Conformal Coatings by the Sol?Gel Process (pages 1261–1264): L. C. Klein, B. Abramoff and H. De LambillyChapter 20 Ion Implantation of Silicon Nitride for Rolling Element Bearing Applications (pages 1265–1276): J. A. Morrison, A. B. Thakker and A. J. ArminiChapter 21 Characterization of Commercial Zirconia Ceramics (pages 1279–1288): Pekka Lintula, Tapio Lepisto, Erkki Levanen, Tapio Mantyla and Toivo LepistoChapter 22 Development of Low?Temperature Stabilized Sintered ZrO2 Products (pages 1289–1292): Shu Hua ZhangChapter 23 Characterization of Psz by Fracture Mechanics (pages 1293–1296): K. Wallin, P. Kauppinen and P. AuerkariChapter 24 Microstructural Effects on the High Strain?Rate Behavior of Zirconia (pages 1297–1304): A. P. Ritter, G. L. Childs and S. R. WinzerChapter 25 Effects of Oxygen Non?Stoichiometry on the High Temperature Performance of a Yttria?Tetragonal Zirconia Polycrystal Material (pages 1305–1310): Jeffrey J. Swab, Robert N. Katz and Caroline J. StaritaChapter 26 Investigation of Selected Silicon Nitride and Silicon Carbide Ceramics (pages 1313–1332): N. L. Hecht, D. E. Mccullum and G. A. GravesChapter 27 Process Improvement for Si3N4 for Heat Engine Applications (pages 1333–1341): H. Yeh, H. Fang and K. TengChapter 28 Crystallization and Characterization of Y2O3?SiO2 Glasses (pages 1343–1353): C. H. Drummond, W. E. Lee, W. A. Sanders and J. D. KiserChapter 29 Microstructural Evolution on Crystallizing the Glassy Phase in a 6 Weight % Y2O3?Si3N4 Ceramic (pages 1355–1365): W. E. Lee, C. H. Drummond, G. E. Hilmas, J. D. Kiser and W. A. SandersChapter 30 The Influence of Microstructure Orientation on the Fracture Toughness of Si3N4 Based Materials (pages 1367–1370): Craig A. Willkens, Normand D. Corbin, Vimal K. Pujari, Russell L. Yeckley and Michael J. MangaudisChapter 31 Cyclic Fatigue of Sintered Si3N4 (pages 1371–1381): M. Masuda, T. Soma, M. Matsui and I. OdaChapter 32 Uniaxial Tensile Characteristics of Silicon Nitride at Room Temperature (pages 1383–1392): R. Vaidyanathan, J. Sankar and V. S. AvvaChapter 33 The Role of Thermal Shock on Wear Resistance of Selected Ceramic Cutting Tool Materials (pages 1395–1407): S. F. Wayne and S. T. BuljanChapter 34 Wear Performance of Ceramics in Ring/Cylinder Applications (pages 1409–1418): Keith F. DufraneChapter 35 Influence of Temperature and Sliding Speed on Friction and Wear of SiSiC and MgO?ZrO2 (pages 1419–1429): M. Woydt and K.?H. HabigChapter 36 The Effect of Surface Transformations on the Wear Behavior of Zirconia (TZP) Ceramics (pages 1431–1442): I. Birkby, P. Harrison and R. StevensChapter 37 Improved Contact Damage Resistance of a Si3N4/TiC/SiCwh Composite (pages 1443–1451): C. R. Blanchard?Ardid and R. A. PageChapter 38 Thermal Load Simulation by Laser?Beaming (pages 1453–1461): H. K. Tonshoff and S. BartschChapter 39 Determination of Binder Distribution in Green?State Ceramics by NMR Imaging (pages 1465–1470): Leoncio Garrido, Jerome L. Ackerman, William A. Ellingson and John D. WeyandChapter 40 Deblurring of Conventional Tomography Images with Applications to the NDE of Advanced Ceramics (pages 1471–1481): T. Hentea, W. A. Ellingson, R. A. Roberts and R. J. KrizChapter 41 Application of Magnification Xeroradiography to Advanced Ceramics (pages 1483–1489): R. J. Kriz and W. A. EllingsonChapter 42 Computed Tomography and Neutron Scattering Study of Zirconia Toughened by Alumina (pages 1491–1502): B. D. Sawicka, J. D. Sullivan, J. H. Root and S. J. GlassChapter 43 Improving the Reliability of High?Performance Ceramics Using Nondestructive Evaluation (pages 1503–1516): D. J. Cotter, W. D. Koenigsberg, A. E. Pasto and L. J. BowenChapter 44 TZP?Ceramics in Humid Conditions at 150°C (pages 1517–1523): T. T. Lepisto, P. V. Lintula and T. A. MantvlaChapter 45 Environmental Effects on Slow Crack Growth in Silicon Nitride (pages 1525–1530): C. H. Henager and R. H. JonesChapter 46 In?Pile and Out?of?Pile Corrosion Behavior of Thoria? and Urania?Based Nuclear Fuels (pages 1531–1542): J. C. ClaytonChapter 47 Technology Transfer: Key to the Successful Commercialization of Research a Panel Discussion (pages 1545–1546): Chapter 48 Korean Materials Technology and Manufacturing: International Implications a Panel Discussion (pages 1547–1548):